Warn M15E Lock Out Hub Question

Hobcobble · 11-20-2009, 11:36 AM

For a good number of the '61-'68 W100s & W200s the Warn "M7"
lock-out hub was used as original equipment. According to Warn
Industries, these worked on Dodge DANA 44 axles from '59-'74.
The "M7" is marked in the finger recess of the lock-out dial.

I recently came across some NOS Warn M15E lock-out hubs.
As with the M7, the "M15E" is also marked in the finger recess
of the lock-out dial. It is, in general, the same in appearance
as the M7. I am wondering if anyone out there has the M15E
lock-outs on their W100 ['61-'68] or W200 ['61-'71]??
Warn Industries also lists this as being used on '59-'74 Dodge
DANA 44 axles. Any information will be appreciated. I'm also
wondering if the M15E could be specific to the early 6 lug half ton
and later ['69-'74] five lug half ton DANA 44s?
John

Jeremiah · 06-11-2010, 02:03 AM

I will check out the locking hubs on my '65 this weekend. They are vintage warn units however I'm unsure of the model.

Thank you,

Jeremiah

Jeremiah · 06-13-2010, 12:35 AM

I verified my hubs today and they are in fact M7's. 'Sorry I could not be o any help.

11-20-2009, 11:36 AM	#1
Hobcobble Subscriber Join Date: Oct 2004 Location: Lockport, N.Y. Posts: 390	Warn M15E Lock Out Hub Question For a good number of the '61-'68 W100s & W200s the Warn "M7" lock-out hub was used as original equipment. According to Warn Industries, these worked on Dodge DANA 44 axles from '59-'74. The "M7" is marked in the finger recess of the lock-out dial. I recently came across some NOS Warn M15E lock-out hubs. As with the M7, the "M15E" is also marked in the finger recess of the lock-out dial. It is, in general, the same in appearance as the M7. I am wondering if anyone out there has the M15E lock-outs on their W100 ['61-'68] or W200 ['61-'71]?? Warn Industries also lists this as being used on '59-'74 Dodge DANA 44 axles. Any information will be appreciated. I'm also wondering if the M15E could be specific to the early 6 lug half ton and later ['69-'74] five lug half ton DANA 44s? John

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-11-2010, 02:03 AM	#2
Jeremiah Premium Forum User Join Date: Nov 2009 Location: Klamath Falls, OR Posts: 34	I will check out the locking hubs on my '65 this weekend. They are vintage warn units however I'm unsure of the model. Thank you, Jeremiah

06-13-2010, 12:35 AM	#3
Jeremiah Premium Forum User Join Date: Nov 2009 Location: Klamath Falls, OR Posts: 34	I verified my hubs today and they are in fact M7's. 'Sorry I could not be o any help.