Tweet
Is the room on the tailshaft boss of the Getrag to mount the stock universal Chrysler tailshaft mount so it will mount to the frame Xmember in its stock location?It sure looks like i can locate and drill the holes in the tailshaft housing where i need them.Therefor only needing a intermediate shaft that is 2.5" shorter.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
- Power Wagon T-Shirts are now available for purchase on-line through the Store. They are only $15.00 each plus shipping. Shirts are available in sizes from Small thru 4X and are Sand in color. Design/Logo is printed on the back of the shirts and the front is free of any designs.