Brake Drum removal 61 WM300...

[Lazarus]

Hope this helps someone. This is a picture of the back of the brake support assembely. Can't see brake shoe anchor nuts and bolts.

[Lazarus]

Cleaned brake shoe nuts and anchor bolts.

[Lazarus]

Removed nuts and tapped bolts into drum releasing pads inside.

[Lazarus]

Adjust each pad away from drum. One adjuster bolt head on each side.

[Lazarus]

Remove drum puller bolts from hubs. My 61, has 3 of them one on 3 of 4 hubs.

[Lazarus]

the drum has 3 threaded bolt holes. Screw one drum pulling bolt in each hole and they will force drum from hub.

[Lazarus]

Drum puller bolts will pull the drum from the hub.

[Lazarus]

I used a 4x4 to tap drum off.

[Lazarus]

Sweet! Its off.. Always wear safety equipment.. Gloves, Eyewear, Footwear.. I'm sure someone will make fun of me, calling these drum puller bolt! drum puller bolts... thks ...gc