WM300 Plug Wires part #?

[pwrwagonfire]

Gentlemen,

I have been having a lot of trouble finding the correct part # for the spark plug wires on my power wagon.
I thought I had the right ones twice, and they both showed up several inches two short.

If anybody has a number which they know is correct, I would be very grateful!

I tried Standard 9316 (read it off the wires on the truck to be replaced)!

Thanks in advance!

[John Waak]

I ordered custom cut wires from Magnecor (electrosport 7mm)
If you don't have an old set of wires to measure from, use a role of solder to mock up the length you will need from distributor to spark plug.

[URL="http://www.magnecor.com/magnecor1/main.htm"]

[pwrwagonfire]

I ordered custom cut wires from Magnecor (electrosport 7mm)
If you don't have an old set of wires to measure from, use a role of solder to mock up the length you will need from distributor to spark plug.

[URL="http://www.magnecor.com/magnecor1/main.htm"]

Thanks! Appreciate it!

[Gordon Maney]

pwrwagonfire, your email address is bad, forum notification emails are bouncing. Please correct your email address in your user control panel.