Tweet
917423A8-0090-440D-AF1B-B063A6E9FF76.png
Sneak peak at the tailgate I’m going to build
Sneak peak at the tailgate I’m going to build
-
-
Will you be stamping the Power Wagon into the Gate, or will it be the Emblems?1967 W200.aka.Hank
1946 WDX.aka.Shorty
2012 Ram 2500 PowerWagon.aka Ollie
Life is easier in a lower gear.Comment
-
Finished the box and tailgate, need to
dress up a few areas with a grinder yet then try test fitting it to the frame
97FD3AAF-2243-4E81-B824-22F0C660C5A2.jpegE0614B5A-A653-4BE4-8FC9-EE90FAAFAC0B.jpeg
9CF71726-3A56-48BF-9A7C-227D7CD5F7EC.jpegComment
-
Looks great man! Awesome work!1942 WC53 Carryall in progress.Comment
-
-
It does look great, props on the work! Are you keeping the old tailgate? I’d take it off your hands if you were not planning to use it.Comment
-
That Tailgate turned out beautifully, How did you manufacture the lower tube?1967 W200.aka.Hank
1946 WDX.aka.Shorty
2012 Ram 2500 PowerWagon.aka Ollie
Life is easier in a lower gear.Comment
-
Thank you, there’s a fellow from NY who is interested in all my old panels. I can let you know if he backs outOriginally posted by bilfman View Post
Thank you, I used 1.25” OD pipe welded to the brake shapes piece then cut out the middle hinge. Slid 1” OD pipe inside then plug welded it in from the backsideOriginally posted by Matthew Welcher PWA View Post
Comment
-
Thanx, I’d probably be interested in the whole lot as well. Close enough for a quick pickup. Keep me postedComment
-
-
I’ve had quite a few requests (one demand lol) for the drawings of the box. Effective immediately you must be $upporter of the PWA to receive the plansComment
-
Thank you for your support of the PWA. It is greatly appreciated.Originally posted by gyman98 View Post1967 W200.aka.Hank
1946 WDX.aka.Shorty
2012 Ram 2500 PowerWagon.aka Ollie
Life is easier in a lower gear.Comment
-
Built a battery holder under the box for a group 31 battery. Got the exhaust nearly done, need to pick up a couple rubberhangers. Installed the transfer case and shifter. Finished the turn over ball after test fitting the box
4A9F82C2-8CA4-4ED7-82D1-FBEAB0E0151C.jpeg
8DA32F31-4ED6-4BBB-ACD8-FA98C03C8D5B.jpeg15D55D27-2099-413E-ADEF-979D79F17B6B.jpegF5FDB2F2-9233-48E3-97E7-B00C9F71DE92.jpeg
5602F860-93AB-47B2-BB7D-47E997D0D102.jpeg
35D782D7-68CC-4E1E-962A-9AF0AE720EBB.jpeg
96E0820C-C11A-45EE-BF7B-43275335FF97.jpegComment
-
AD86D94F-90A8-40FA-A6CD-A561A420AC8F.jpegF232A180-BC36-4F22-B456-78C5A277EC01.jpegF3F933F9-DB0C-4BA4-9A18-F6166B781F48.jpeg590F13DE-97CF-4D82-938B-D018D1DF1177.jpeg Picked up my box from being blasted and primed, doesn’t look so homemade now. Set the cab back on the frame and polished the valve coversComment
Comment