I'm in the process of mocking up a complete bed kit from Mar-K and noticed 2 of the bed strips have holes that don't align with the cross members. Hopefully you can see in the picture the first 3 strips (from the bottom) align and the next 2 are to the right. Just seems odd 2 strips would have offset holes that dont attach to cross members. My original bed was trashed so don't know if those two strips are located somewhere specific.
![](http://i297.photobucket.com/albums/mm214/NTWS1/IMG_3080_zpsya1atm3w.jpg)
Here's another pic of the bed. You can see the 3rd and 5th set of holes, from the back of the truck, are offset.
![](http://i297.photobucket.com/albums/mm214/NTWS1/IMG_3080_zpsya1atm3w.jpg)
Here's another pic of the bed. You can see the 3rd and 5th set of holes, from the back of the truck, are offset.
![](http://i297.photobucket.com/albums/mm214/NTWS1/IMG_3081_zpsxax8o6hi.jpg)
Comment