Tweet
Hey guys I have all my parts and everything is powder coated and cleaned meaning I am close to assembling the winch. In the past working on other trucks winches ie. M37 and a Deuce after I get the winches rebuild and reassembled using the gaskets/shims in the rebuild kits I seem to always have niggling little weeps of oil coming out primarily in the gearcase area its like those shims/gaskets that you use to set your preload on the bearings aren't the worlds greatest gaskets. I know I need the shims/gaskets to set my preload but has anybody ceome up with a better way to seal these areas so there is NO weeping of oil here?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
- Power Wagon T-Shirts are now available for purchase on-line through the Store. They are only $15.00 each plus shipping. Shirts are available in sizes from Small thru 4X and are Sand in color. Design/Logo is printed on the back of the shirts and the front is free of any designs.
Comment