Intake woes on my M-880...need some fast help guys!!

[ram fan]

Ok, I put on a used 4bbl intake on the truck. I got it torqued down and it's leaking coolant at the #1 cylinder between the intake and the head. Could the intake (aluminum Weiand) be warped and causing it not to seat right against the gasket. Can I put another gasket on (two on one side) to seal it up. These are new gaskets too. I need some fast help as this is my work wagon.
TIA!!!!

Craig

[pieter]

The intake could be warped. Only real way to know is to pull it off and check with with a straight edge. Worse case would be to buy an extra set of gaskets and put your old one back on until you have more time to decifer the mystery.

Pieter