Just found this site!!!

[Gordon Maney]

Gordon,
You are so quaint! ha!ha!
The exercise bike attached to the generator should help pick up your speed.....= )
Jim's 50 miles up into the Sierra's and has no choice, is this a question of how far from a DSL switch you are located?

I just need to get farther along in my remodeling to where it makes sense to run the lines and have the equipment where it will be.

[MoparNorm]

Gordon,
You are so quaint! ha!ha!
The exercise bike attached to the generator should help pick up your speed.....= )
Jim's 50 miles up into the Sierra's and has no choice, is this a question of how far from a DSL switch you are located?

[Gordon Maney]

A nicer touch would be MUCH SMALLER PICTURES! Brutal on dialup......

Hello, fellow dial-up user....

[MoparNorm]

It's only 640x483, my 800x sizes must drive you nuts! Which speaking of, feed the squirrels in the cage, maybe you'll get the pictures to load faster? ha!
Have you checked your speed to see if you're getting the full 50 kps?

[JimmieD]

A nicer touch would be MUCH SMALLER PICTURES! Brutal on dialup......

[MoparNorm]

Nice touch with the stripes on the firewall!

[mopar440]

That thing is coming together nice,,,,

How did you lift the cab up onto the chassis when you did it?

Kris

Thanks Ram,

I used my engine hoist (cherry picker) to lift it on and off.. I cut a piece of 2x6 the length I needed to reach from left to right on the inside of the cab. I pushed up to the top against the pinch welds where the weatherstriping goes. I then ran my engine hoist thru the passenger side door window and made sure I had it exactly centered on the 2x6, then just picked it up and rolled it straight out sideways..

Heres a pic of what I'm talking about on the 2x6.. Only in this pic I pick it up thru the rear glass to paint underneath it, but you get the idea...

[RAM]

That thing is coming together nice,,,,

How did you lift the cab up onto the chassis when you did it?

Kris

[mopar440]

Got the 4" stacks, rollbars, and new tailight lenses in the truck last weekend. I put on the decals today, I think it turned out nice.. I also got a little green decal for the tailgate that I put in the lower right stripe...

I've turned the truck around forwards now, getting ready to start on the inside and the tilt frontend..

[mopar440]

Sure won't ever lose that in a crowded parking lot - very nice.

Thanks, yup it should be easy to spot with no problem...

[counciller]

Bright

Sure won't ever lose that in a crowded parking lot - very nice.

[mopar440]

Thanks, I appreciate it.. The Jeep is another project further down the road if I don't sell it before then...

[MoparNorm]

Nice job!
Try to get more Jeeps in the background....ha!ha!

[mopar440]

Here's the lastest pics after the letters were installed and stripes were painted on...







Next weekend I'll install the 4 inch stacks and start on the rollbars...

[mopar440]

Ok now that spring is here and the weather has warmed up I've started working on finishing my truck. He's the lastest pics of what I have done so far the last 3 weeks..