Just found this site!!!

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

[mopar440]

Tilt Hood Updates

I have'nt been on in a while so I thought I'd bring this trend up to date. The next few postings will be the progress build pics of the full tilt..

I hope ya'll like pictures, there's a bunch of them..

[mopar440]

78 headlights on a 89 core support repositioned to fit the 78 grille..

[mopar440]

I have finished with ruffing in the mods on the 89 core support. I'll take it all back apart and dress up all the cuts, sand, prime, paint, ect

I removed the original latch support bracket that was under the top edge and replaced it with a latch support bracket from a 78. I enlarged the light holes and cut out sections around the headlights from the same 78 core support and positioned them in the correct place and used sheet metal screws for now to hold them in place but will replace them with some 5/16 bolts when I reassemble everything later..

89 model Latch bracket removal and 78 model installed

[mopar440]

Got a little more done to it..

New weatherstripping in the doors, all the glass installed, door panels installed, NOS door seals, all the seatbelts and sunvisors are installed, Tuff wheel adapter installed on the column, and a new tinted rear slider back glass with a NOS seal..

Interior and rear window..

[mopar440]

Last two..