Tweet
I'm happy to report that Steel Rubber Products is now making new vent wing rubber and more important the division bar rubber. Anyone who has a PG knows the division bar rubber is always hard and cracked allowing wind and weather in. I just installed a set today and they fit like new factory rubber. It's a process to get them installed but worth it in the end. The only real issue is riveting the new bar in place. They don't provide the 1/8" blind rivets needed which I got at a GOOD hardware store. McMaster Carr probably has them also. I can help guide you through the installation if you need help. Steele has a set of two for $150 which is both bars and new rubber. I'm trying to get them to sell the division bars separately.
-
-
Fantastic news Ron!
Thanks for sharing.
I need to do my vent windows and this is awesome. Anything you can post that details the install would be appreciated.
Thanks again. -
It is great news I should have taken pictures as I was installing the division bar but I've got several more to replace so I'll do that on the next set. If I can get someone to tape it and help upload it to You Tube would be even better. I'll work on that after the Iowa rally. Got to finish my 58 Sweptline project first. http://imageevent.com/ron55/1958dodg...sg96i3.eagle_sComment
-
Thanks Ron
Thanks for the information. I will be happy when they let us buy the division bar rubber from the vent rubber. GeorgeComment
Comment