need help on front end w 100-200

[jdfrmnt]

can someone get me the spring distance and wms for the dana 44 front.thanks joe

[Chewie]

Sure

I could measure them when I get home, but you need to be more clear in what measurements you want..

[jdfrmnt]

I need spring mount to spring mount and wheel mount to wheel mount thank you; joe

[712edf]

Seems like the springs are 32.5" from center to center & wms is 67.5".
What year W100/200 are you refering to? I believe the above specs are for 72-93, but may go back to 61-71 trucks too.

You might ask on the sweptline forum if your truck is pre 71. Or on the ramchargercentral forum if 72-93.

Bucky

[jdfrmnt]

Im looking for the 61-71 to see if I can swap out to a large ball 44

[Hobcobble]

Im looking for the 61-71 to see if I can swap out to a large ball 44

Joe,
If your large knuckle Dana 44 also comes from a Sweptline truck, it'll
swap over. I have a large knuckle Dana 44 on my '68 W200 and one
that's going to be installed on my '61 D200 I'm converting to 4wd.
John