If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Power Wagon T-Shirts are now available for purchase on-line through the Store.
They are only $15.00 each plus shipping.
Shirts are available in sizes from Small thru 4X and are Sand in color.
Design/Logo is printed on the back of the shirts and the front is free of any designs.
For getting pictures with clarity and size, try opening them in a photo editor on your computer, then re-save them in a new name, and look for the options button, you might have a "picture quality setting", or reduced color setting.
If you have a pic off a typical "new" digital camera, even if you reduce the physical size (8x10 to 3x5) you really dont drop the memory size much.
Another trick is to link to the picture if its on another web site, like webshots, or if you have a site like me, using the IMG tag at the top of the post reply page,
(Picture Removed) then the picture can be any size, and Gordon doesn't lose disk space on his server, 'cause the pic is somewhere else...
Hope this helps!
Gordon, feel free to delete this if you want
Longhunter, if you want, send me your pic full size, I'll put it on my site and you can link to it from there,
Thank you for the information! I am in the process of converting over to a digital camera. This should be an easier format to get pictures where I need them, and improve the quality of the images!
I appreciate the offer to post them on your site! I will look into that option when I get an image that is good enough to post there!
We cannot delete posts, only Gordon can do that, we CAN however delete ALL of the content in our own posts, so instead of posting again about a previous post, just go to the post and click on edit, you can re-do or change anything in your post.
As for picture size (the pixels are NOT always the actual physical size) if you have Photo Shop, or Dell Image Expert, you can resize your photos and if you change them to jpg. that is MUCH better than bit map or other formats for photo "size".
Web shots is free and will sometimes have a time limit or access issue that limits access and gives us the dreaded red X of death. Most guys with multiple photos (I have 8,500) use Image Event, but it is not free.
Carls' photo above is 1024 pixels wide, and it makes the page wierd if your "settings" on your monitor is not set to accept it. 576 pixels width is just about perfect for the screen width here.
Check your in box! I found am interesting picture of an M37 in arctic trim. I am not sure of the origin of the photo.
Longhunter: The origin of the photo is Jerry Park who took it while in Alaska... He sent it to me for inclusion on my website where it has this for a caption (writen by Jerry):
"Another shot of an artic equiped M37 taken by JerryP. This truck is marked like all the trucks in the Transportation Motor Pool Ft. Greely, Ak. 1960."
Jerry is down in Arizona now recovering from the cold...
Thank you for clearing up the mystery of the great M37 picture! Once again your Website has provided interesting and valuable information, that helps all of us interested in the M37!
Maybe you could answer my earlier question about the cover on the bed. It looks to be inflated with ait in chambers, is that so? And also, did they have heaters in the back as they did with some deuces?
The cover is just heavily quilted... I think that the heat for the passenger compartment was provided by pass through from the cab instead of having a heater in the bed (as with the 2.5 ton kits), but I'll check with Jerry to see if his memory is better...
You might also want to check out some of the other photos on the page, especially the ones taken on days when it had gotten to minus 50F the night before...
You will note in the photos of the trucks with the arctic kits that the only exhaust pipes visible are for the engine heater, driver compartment heater, and engine...
Comment