engine swap 97 to 73

[dodge05]

It has been awhile since I have checked in but I have got alot done!!!
I got a transfer out of a 87 dodge 150 it had a 241D. The snout on it was a 1/2 inch to long so I machined it down(black tape and a die grinder) and it fit like a dream. Finished my mount and drivelines. The drivelines fit the same as on the old set up!!! Now on to the body and then back to the radiators etc.

[dodge05]

Making progress!!
Wanting to go to cross over steering but was wondering what to look out for. I am worried about how much angle on the drag link before you get steering problems?
Was going to put some pictures up but haven't figure out how to get them on here!!

[dodge05]

On a 97 dodge 1500 ram has a sensor in top of the Rearend is that the ABS or a speed sensor? It has a speed sensor in the transfer case or they have two?

[dodge05]

it has been awhile but back on it! The problem i have now is the a/c evaporator can i use the same evaporator with the 97 a/c system? i can get it to adapt but will the pressure going threw the 75 evaporator change compared to the one in the 97?