New Workbench

[Gordon Maney]

I don't buy those. I would be in luck if they still sold peanut butter in glass jars!

[Matt Wilson]

I think you can commonly find pickles and olives and such in glass jars still.

[BigSmoke]

All these jars are "Ranch Dressing" chip dip. Been collecting them for a very looooooooooooooooooooooong time.

They're still in stores so I get another one about once a month.

[Gordon Maney]

Seriously, this might be the time to ask all your friends if they have any glass jars they don't want. Collect and store them for the future.

[712edf]

Sadly, there is very little anymore sold in glass jars.

I want to say baby food still comes in them, but honestly I don't know. I don't have children & havent eaten baby food since college haha.

Certain brands of picante & cheese sauces still do.

I miss glass. Plastic has ruined our society, in my opinion.

Bucky

[Gordon Maney]

Sadly, there is very little anymore sold in glass jars.

[712edf]

My uncle does the hanging jar thing too. Saves space plus you can visibly see what's inside each jar w/o having to dig through them.

Bucky

[Gordon Maney]

I like it!

[BigSmoke]

This is what I made tonight.

I had all these jars full of nuts, bolts etc mounted underneath an overhead shelf that I removed. The shelf always made me feel crowded but I didn't want to let go of the jars.

Hopefully this will work out.

[BigSmoke]

I like your welding table/fixture, too. The one constructed of C-channel. How do you use that? Did you build it for a particular purpose or project?

This is how I build my welding tables.

The most popular to build a wedling table is with a flat steel surface that's made from 3/8" or 1/2" plate. It's extremely rigid, almost perfectly flat, but is very expensive!

A lot of people will mock up their project on the table and tack weld down to the surface on order to keep the parts sqaure during the welding process. Then you have to cut the tack welds loose and grind them off your project and your table afterwards.

With C-channel or even better, jr I-beam, I can still achieve the rigid, flat surface and save a lot of money. Plus, I can literally place a clamp anywhere on anything on different angles without having to tack weld.

The C-channel works extremely well. However, I can only clamp on one side of the channel. The I-beam is more rigid and provides a little more clamping surface.

I like the channel and the flat surface tables. If I had deeper pocket's and could figure out a way for my hobbies to make some money, I'd have a flat surface table with 1/2" plate. My table cost about $200+. I'm guessing the 1/2" plate table would cost about triple.

[BigSmoke]

Looks like a winner. I can't tell in the last picture but did you paint it all? Fighting clutter is never ending battle around here.

I typically don't paint anything that will be indoors 24/7. I'm so meticulous about some things. I'd spend more time touching up the scratches than actually working on it. Haha.

[Gordon Maney]

I like your welding table/fixture, too. The one constructed of C-channel. How do you use that? Did you build it for a particular purpose or project?

[Ron in Indiana]

Looks like a winner. I can't tell in the last picture but did you paint it all? Fighting clutter is never ending battle around here.

[BigSmoke]

I was able to finish the shelves and got the pegboard hung on the wall.

I didn't have enough expanded metal to finish the third shelf so I used up some 16 gauge plate that I had.

Now it's time clean up the huge pile of parts, tools and junk beyond the pics.

I'm an extreme neat freak so the mess is driving me nuts.

[BigSmoke]

I've got the adjustable feet, the top and backsplash all cut and welded into place today. Almost finished.

There was a huge bow in the 1/4" top plate that I used. Must have used about every availible clamp in my stash to flatten it out!

Above my new bench will be a 4'x8' peg board. I'm hoping to un-clutter my tool box some.