Auto/Truck Lifts

[bosco]

Since I am in the planning stage of a new shop, the idea of an auto lift came up. My son (who is an auto mechanic) suggested a 10,000 lb 2 post lift. After looking at the gross vehicle weight of my pickup (8800 lbs), I agree with him. The M37 is only about 6000 lbs.

I will say that I do not have any past experience with these new lifts. If any of you have used one or have one in your shop, I would be interested in hearing about your experiences and recommendations.

Thanks ....

[MoparNorm]

Because California...

...banned all sources of potential underground petroleum fluid leaks, these above ground lifts have been very common out here for the last 15-20 years. They work well, but take up floor space. Don't buy Chinese junk, look for a Made in USA unit. Check the web there are many sources. Your slab should be thicker in the lift post locations so that the post-set anchors do not "pop" through the slab.
MN