Then I needed to get the axle end of the trac-bar built. I had planned from the get go to eventually tie my pass front link assembly into the track bar bracket just for cleanliness. I didn't intend to but actually ended up including the lower front strut tab as part of the design.
All of these parts are part of the trac-bar and trac-bar bracket. Took me a couple of hours to get the designs figured out.
![](http://i273.photobucket.com/albums/jj230/alxj64/WC-53%20Project/Suspension%20Components/IMG_20131006_121918_596_zpse1dae46e.jpg)
![](http://i273.photobucket.com/albums/jj230/alxj64/WC-53%20Project/Suspension%20Components/IMG_20131006_144950_664_zps93a32459.jpg)
And this is how close the drag link gets at full turn with the steering stops bottomed out, worse case scenario. I'd say it was successful in packaging. Now I just have to build the frame side trac-bar bracket and I believe I am going to need one small bend to kick the thing around the front diff cover and below the steering box.
![](http://i273.photobucket.com/albums/jj230/alxj64/WC-53%20Project/Suspension%20Components/IMG_20131006_145054_312_zps0fd4dc0e.jpg)
Thoughts?
All of these parts are part of the trac-bar and trac-bar bracket. Took me a couple of hours to get the designs figured out.
![](http://i273.photobucket.com/albums/jj230/alxj64/WC-53%20Project/Suspension%20Components/IMG_20131006_121918_596_zpse1dae46e.jpg)
![](http://i273.photobucket.com/albums/jj230/alxj64/WC-53%20Project/Suspension%20Components/IMG_20131006_144950_664_zps93a32459.jpg)
And this is how close the drag link gets at full turn with the steering stops bottomed out, worse case scenario. I'd say it was successful in packaging. Now I just have to build the frame side trac-bar bracket and I believe I am going to need one small bend to kick the thing around the front diff cover and below the steering box.
![](http://i273.photobucket.com/albums/jj230/alxj64/WC-53%20Project/Suspension%20Components/IMG_20131006_145054_312_zps0fd4dc0e.jpg)
Thoughts?
Comment