b2pw126 brake master cylinder

[olgraybeard]

i have to rebuild or replace my brake cylinder, how does it come out, does the big bolt with the spring that you see looking down at it have anything to do with it is there a good cheap sourse for parts

[Charles Talbert]

i have to rebuild or replace my brake cylinder, how does it come out, does the big bolt with the spring that you see looking down at it have anything to do with it is there a good cheap sourse for parts

Don't waste your time rebuilding, that will most likely be a failed endeavor. Replace it with new, we have some new ones if you don't have a nearby source. To pull it out, just unhook the line and remove the bolts from the mounting flange.

[olgraybeard]

having a hard time seeing the mounting flange is it on the end that the push rod is in or on the side of the resovoir

[Charles Talbert]

having a hard time seeing the mounting flange is it on the end that the push rod is in or on the side of the resovoir

Mounting flange is on the push rod end. Should be three, 3/8" bolts.

[olgraybeard]

How much do you get for a new master cylinder for a b2-pw mine is rectangular in shape with a 1" hex plug for fill.
you can answer here or email me at mail1948@yahoo.com