Have '49 B1PW-noticed recently that tail lights stay dimly lit after all other lights are turned off-key switch is turned off too. Current wiring has not been fooled with for 10 years or so-truck is used regularly-no recent work of any type-suggestions? Thanks, Mark Schaffield
Announcement
Collapse
No announcement yet.
tail lights
Collapse
X
-
Fascinating.
Try disconnecting the battery lead to the headlight switch. [disconnect the battery before you do that.]
I suspect it is the headlight switch, although I have never seen one fail that way.Power Wagon Advertiser monthly magazine, editor & publisher.
Why is it that the inside of old truck cabs smell so good?
-
current leaks
Although I don't have much experience w FFPW I have had this with other cars/trucks. Usually dim lights mean a high resistance short from continuously powered circuit in a switch, through other components (coil), solder joint wire repairs touching in loom, bulb filiments shorting. If u have turn signal setup with 4way flasher could be the culprit. I've also found connectors touching on switch bodies that had high resistance.
Comment
Comment