If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Power Wagon T-Shirts are now available for purchase on-line through the Store.
They are only $15.00 each plus shipping.
Shirts are available in sizes from Small thru 4X and are Sand in color.
Design/Logo is printed on the back of the shirts and the front is free of any designs.
Besides the gauges and cowl lights, were there any changes to the cabs from 46-68? I'm looking at a '49 cab as a replacement for my 67. Will there be any issues?
Thanks in advance!
-Tim
The mount style changed at some point or was that only in the frame side?
When the method of cab mounting changed, it was the location of riveted brackets on the truck frame that changed as a result, not the cab.
There were other minor changes to the cab between 1946 and 68. None of which should affect putting a '49 cab on a newer truck as most of the changes took place earlier. Some that come to mind are in the brackets where the headliner attachs to the cab roof, location of overflow tank wellnuts in the firewall, and early '46 cabs had a wiring harness knockout left over from WWII cab tooling.
When the method of cab mounting changed, it was the location of riveted brackets on the truck frame that changed as a result, not the cab.
There were other minor changes to the cab between 1946 and 68. None of which should affect putting a '49 cab on a newer truck as most of the changes took place earlier. Some that come to mind are in the brackets where the headliner attachs to the cab roof, location of overflow tank wellnuts in the firewall, and early '46 cabs had a wiring harness knockout left over from WWII cab tooling.
Good job....
Power Wagon Advertiser monthly magazine, editor & publisher.
Why is it that the inside of old truck cabs smell so good?
Comment