Alternator Part Cross-over? What fits?

[im02crazy]

For my 1967 WM300. I've made a few calls to parts counters, searched here, checked dozens of websites, and tried to match the cross-over NAPA part from the Power Wagon Parts Crossover (Vaughn)- that part's no longer carried. Nothing. Nobody knows which Delco 10SI alternator fits up.

Anybody have a good supplier number on this? Much appreciated. The truck is a l m o s t on the road. Thanks.

[Jerry Henry]

Maybe these guys can help.
I have not bought from them, but plan to in the future. I want to upgrade the alternator on my W300.
Call and see if they know what you are looking for.
http://www.qualitypowerauto.com/catalog.php?item=63

[im02crazy]

Alternatives

Thanks Jerry. Nice site. Seems that the J bracket set might be the way to go to adapt any of the Delco 10SI units to a Chrysler/Dodge mount.

My local shop (P&H Auto Electric) here in Baltimore had a heavy duty marine alternator that seemed to match up with my original Chrysler "square back" unit. They will also rebuild my unit for about $35. but I want to eliminate the firewall regulator in my rewire.

[wayneh]

Im02Crazy:

How is the engine saga/drama going?

Wayne

[Gordon Maney]

Maybe these guys can help.
I have not bought from them, but plan to in the future. I want to upgrade the alternator on my W300.
Call and see if they know what you are looking for.
http://www.qualitypowerauto.com/catalog.php?item=63

That is a very neat bracket that would greatly simplify such installations.

[im02crazy]

Alternator in and charging

The marine alternator fit up very nicely; just had to use a 7" piece of 3/8-24 SS all thread instead of the original bolt.

Yes Gordon, that bracket really makes life easier to fit up a 10SI or GM unit to the 251.

We're hoping to get her out on the street Monday, and do the over-heating test.