Starter options

[bilfman]

Hi folks, I am looking to see if any other starters can be used on the 230 flathead. I am having trouble sourcing a starter here in Canada. I need 2 starters and am hitting dead ends at every turn. So just inquiring to see if there are others options out there. I have been told my armatures are bad. So can another type of easier sourced one be used for either replacement or parts. I know Vintage has them but with our Canadian 'peso' so low the shipping and exchange is killer. Any help, advice, sources or guidance is truly appreciated.

[Dutch]

Are you saying that yours can't be rebuilt? Mine was shot and I just had it rebuilt by a local auto electric shop, cost me $2000-$250 but it looks brand new again.
I am not aware of another model that will work but I am fairly new to these trucks

[bilfman]

I think they can, but the armatures will have to be rewound. So with shipping it will be a 1000 touch for both starters. Just seeing if there are other options out there. Before having to drop the big bucks.

[KLEMM]

Sounds very high, I would take it some where else. I had mine rebuilt for $100.00.

[dad2nick]

I think I have a couple of spare armatures. I could send you one if you are still in need. Or can send you a rebuilt starter for a couple hundred US $.

dad2nick1 at yahoo dot com

[dad2nick]

You can rebuild your own starter with a decent armature.

http://imageevent.com/dad2nick/sixvo...hgs3.penguin_s

[bilfman]

Problem is my armatures require rebuilding. So am looking for some other options that are a little less invasive on the wallet. That said I was able to source a Canadian rebuilder in Vancouver that will charge about 400 to rebuild the starter and armature.

[bilfman]

Dad2nik I just saw your post a few days after I sent mine off. If I run into a snag I will definitely contact you. Thank you for the offer. Here in Canada I can find 251 parts all day long no problem. 230 is a different story. Not a lot of options. Was hoping maybe a 251 starter would work, was just putting it out there to see if anyone has tried another starter.

[dad2nick]

I think the 251 starter will work just fine, but will require a remote solenoid since it has no foot pedal operated starter switch. Let me know if you need a 230 armature. I have several extras and would be happy to send you one if you are desparate.