model 65 heater options

[W_A_Watson_II]

Do you know if this motor will fit in Sarah's truck with the model 61 heater?

You would have to pull it out and take some meaurements and check, but I'd bet it does.

Voltage 12
Rotation CW/CCW
Shaft Dia. 1/4"
Shaft Length 1-1/2"
Motor Length 3-3/4"
Motor Dia. 3"
Description Heater
Stud Distance 2-5/16"
Connector Type 2 Lead Wires
https://www.rockauto.com/en/moreinfo...jsn=__GIX__3__

I got the motor from NAPA, Siemens PM354X (Comfort Temp, by Four Seasons #35576). they have many options if it's measurements don't match the one you pull out of the Model 61.

[53Crusher]

heater motor

Should fit in Gordo. I used the Four Seasons #35576 in my model 65 and the dodgepowerwagon.com master parts interchange says:

HEATER UNIT - Model 61.
Replacement Motor - Comfort Temp, by Four Seasons #35576 (12v)
The motor's shaft requires shortening and it has studs at both ends of the motor. You will need to cut off the ones at the shaft end. It is
reversible, but use the orange wire for hot, black for ground. It works great.

[Andydodgegeek]

Thank you for the quick replies. I found the 4 seasons unit for $38 on Amazon. I've gotta keep Sarah warm.