Announcement

Collapse
No announcement yet.

Sarah's Power Wagon Gordo getting a heart transplant

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sarah's Power Wagon Gordo getting a heart transplant

    For those that don't know Gordo is the name of my wife Sarah's 1948 Power Wagon. I'll let her tell more on that story. I just figured out how to post pictures so I thought I would start a thread on the engine replacement of Gordo. Nothing fancy just replacing the 230 with another 230. I am currently in the process of cleaning and resealing the new engine. (Technically not NEW but for ease of telling the story I'm going to call it new.) Here's a picture of Gordo to start with.IMG_20170610_082219363-2098x1180.jpg

  • #2
    When we first got Gordo we pulled the oil pan off to check the innards out. First off the amount of sludgy goop in the bottom of a 70 year old truck is pretty impressive. Unfortunately we also discovered that Gordo had a crack in the block. It ran good but we knew it was only a matter of time before a new engine would be in order. IMG_20160128_182659153-738x1312.jpg

    Comment


    • #3
      IMG_20160128_183251075-2099x1181.jpg

      Comment


      • #4
        If you look hard you can see the crack between the cylinder and the cam.IMG_20160204_183153148-2099x1181.jpg

        Comment


        • #5
          The engine lasted a couple of years. Pretty good considering the amount of driving Sarah did with it. Her commute to work is 65 miles one way and several times she drove Gordo there. On Interstate 35, going up to 70 mph! I'm not joking! Here I'm following her doing 63 on the freeway. She said it would cruise nicely at this speed.IMG_20170526_053742128-738x1312.jpg

          Comment


          • #6
            Interesting story, and interesting place to find a crack. And WOW! 70mph! It must have 4.89' differential gears, but even then, I'm surprised it would get going that fast. That's probably pushing the rpm's beyond what is good for the engine.

            Comment


            • #7
              Well.... I did find the point at which the engine over revs is approximately just over 70 mph... Heh heh.

              Comment


              • #8
                In the end, it actually seemed to thrive at 65. Crazy. Crazy FUN, THAT IS!! I'm hoping the new engine won't restrict me too much... I'm too cheap to buy an overdrive.

                Comment


                • #9
                  picture of Sarah helping me.IMG_20180414_113916784-738x1312.jpg

                  Comment


                  • #10
                    And here she's adjusting valves.IMG_20180414_121959046-738x1312.jpg

                    Comment


                    • #11
                      IMG_20180413_183720769-738x1312.jpg

                      Comment


                      • #12
                        The last picture is the new rear main seal and here is the front.IMG_20180413_183735583-738x1312.jpg

                        Comment


                        • #13
                          IMG_20180414_170901551-738x1312.jpg

                          Comment


                          • #14
                            Paint is on and drying. Now we're going out to dinner.IMG_20180414_170913696-1312x738.jpg

                            Comment


                            • #15
                              Looking good! It's good to see you guys are keeping Gordon's Power Wagon going, and it really looks great. Just be careful with the high rpm's. Some of these engines tolerate high rpm's better than others, as some are better balanced than others, and maybe less wear than others.

                              Comment

                              Working...
                              X