Tweet
Dang it ,the other[2] club 440's are 3/4ton long bed, now I find a 80 150,440,club,short bed.-wonderful-!
Most of the running gear+ tranny has been gone thru with receipts to show, but the thing is ru-st-ed-out, box-toast {in my opinion}, cab corners,rockers,driver floor---holes everywhere !
BUT The Owner has good doors and all other panels/skins NEW to replace{including box sides 1/2s}....what am I getting into with this one ?
I only have a mig welder\angle grinder and limited other tools for general maintance.
Wife says hang on, something -just right will come along, but I'm getting twitchy driving her Taurus everywhere....and try to find a decent sht box just to replace and save that hassel..forget it, can't find one..
twitchin' not b*tchin'
Andy
just needed to vent
thanx guys
Most of the running gear+ tranny has been gone thru with receipts to show, but the thing is ru-st-ed-out, box-toast {in my opinion}, cab corners,rockers,driver floor---holes everywhere !
BUT The Owner has good doors and all other panels/skins NEW to replace{including box sides 1/2s}....what am I getting into with this one ?
I only have a mig welder\angle grinder and limited other tools for general maintance.
Wife says hang on, something -just right will come along, but I'm getting twitchy driving her Taurus everywhere....and try to find a decent sht box just to replace and save that hassel..forget it, can't find one..
twitchin' not b*tchin'
Andy
just needed to vent
thanx guys
Comment