Tailgate parts

[ddarnell]

Does anyone know where I might source those phony plastic clips that hold the actuating rods onto the latch assembly? Has anyone found a better way to secure them? Seems like those clips are just waiting to breakThanksDavid

[Deathdeelr]

Advance Auto had them in an assortment in the HELP/Motormite section for around $3. They're in a pack labeled for door linkage clips but they're the same.

As for securing them a better way, I thought of possibly drilling the rods for a cotter pin but they're really thin. I didn't have a drill press at the time. It was easier just to get new clips.

[ddarnell]

Thanks for the info. I thought about the cotter pin but you're right they are kinda thin. Also thought about threading the ends. If I can get the rods in/out without to much hassle I would consider threading
David

[KRB64]

Ditto on the door clips. I got mine from NAPA. As long as the tailgate is adjusted correctly they seem to hold up until they get old and brittle. They are a PIA to replace though...

[hemibob67]

If you didn't get them yet let me know and I will send you a couple.

[ddarnell]

Haven't hunted any down yet. You have a couple?
David