58 w100 hub help

[jdfrmnt]

I have a d44 small ball front and would like to know if the hubs from a 70 d44 big ball will fit. thanks joe

[Gordon Maney]

Ron Reichhart to the white courtesy phone, please.....

[Ron in Indiana]

Not having experience with the large knuckle axle I can't give you an answer right now. My first impression would be no to your question but that's a guess. I have 59 W300 which I could compare. New lock out hubs for the Dana 44 are readily available.

[Gordon Maney]

I have a d44 small ball front and would like to know if the hubs from a 70 d44 big ball will fit. thanks joe

I just visited with an authority and was told yes, it will fit.

[jdfrmnt]

Thanks for the info.Now to brave the AZ heat and Ron I was talking about the hub not the lockout but thanks anyway. joe

[Gordon Maney]

Oops, I thought you meant the lockout.

[jdfrmnt]

Darn im trying to change to 8 lug so I have more tire options. joe

[Gordon Maney]

Do you have access to the parts?

[jdfrmnt]

yes I have the hubs and spindels and a set of 2013 power wagon wheels and for the back I have a dana 60 out of a 77 power wagon. joe

[Gordon Maney]

yes I have the hubs and spindels and a set of 2013 power wagon wheels and for the back I have a dana 60 out of a 77 power wagon. joe

What you mention there does not mesh with your opening post. I am not understanding something.

[jdfrmnt]

I have the hubs from a 70 w200 dana 44 big ball for the front and the dana 60 for the rear

[Gordon Maney]

OK, I am working on getting an answer.....

[jdfrmnt]

Thanks Gordon. joe

[dougdodgeman]

My first thought is that 2013 power wagon wheels will have an 8 on 170 mm bolt pattern, and the '70's bolt pattern is 8 on 6 1/2". Perhaps that is the same? If I understand / assume, you have a Dana 44, 5 bolt front axle and would like to swap spindles, hubs and drums, as well as your entire rear axle for the 8 bolt pattern?

[Gordon Maney]

Thus far I learn the spindles are the same.