There is a guy on some of the Dodge & Power Wagon sites named Terry, goes by PowerWagon Driver (abbreviated). He lives in California & has owned about every type of Dodge truck imaginable including I believe W500's. He likely would know what crosses over from other axles.
Also the Ford F600 4x4 used the same axle back in the day.
I think Meritor is now the owner of what was Rockwell.
Bucky
Announcement
Collapse
No announcement yet.
W500 Seal Part Number....
Collapse
X
-
Had a local drive train shop search through their catalog archives (catalogs back to the early 70's) and all numbers come back inactive or obsolete. Guess I am going to get creative....
It appears the hub seals from a military 2.5ton axle are the same I.D. But are smaller O.D. (approximately 1/2inch) so I think I can have some wear rings machined to take of the difference.
Leave a comment:
-
W500 Seal Part Number....
Has anyone had any luck finding a part number for the front inner hub seal number for the FDS750 front axle?
I am in the midst of doing a disc brake conversion and figure if I am in this far (down to spare spindles) I might as well replace as many parts as I can (already have bearings and races). Mine aren't leaking (at least not enough to worry about) and don't want to pry mine off (in other words wreck them) unless I can be sure there are replacements available.I can't find any reference online to this axle and therefore no part numbers....Tags: None
Leave a comment: