Wanted/Needed 62-68 W300 Center Link

[solesurvivor]

Like the one below marked 'Rod with end'. Thank you and will pay good $$$ for one.

[712edf]

Dodge used that Dana 70 front through 1974 on W300 trucks (and some W200). Also it came in some 74-77 W600 trucks.

Here is an ebay listing for a 74-77 W600 center link. I don't know if it is for the Dana 70 or the Rockwell FDS75 front. Both axles were offered & the center links look very similar.

https://www.ebay.com/itm/74-75-76-77...pYDLew&vxp=mtr


Might be worth checking into.

Bucky

[Matthew Welcher PWA]

Let me know If you have came up with one, I believe we have a good used one in the yard here at VPW.

[solesurvivor]

Thanks guys. I will check into this today. My work place blocks ebay. Now...is it true that that the passenger side has the ball joint as part of the assembly and can't be removed?

[solesurvivor]

Bucky...the seller did indeed say the part number was different in using the Dana 70 vs the Rockwell which is the one he is selling. OK Matthew(Matt?)...whatchya got there?

[Matthew Welcher PWA]

I have a good used one here in hand. Give me a call at VPW.

[712edf]

Thanks guys. I will check into this today. My work place blocks ebay. Now...is it true that that the passenger side has the ball joint as part of the assembly and can't be removed?

Only one end is removable because only one place is needed to adjust for toe-in, unlike center links that attach to pitman & idler arms. Those need two.

Bucky

[712edf]

Also keep in mind that International Harvester used the Dana 70 front in their 1 tons. These were truck model 1310 (1969-73) then 74-75 just labeled 200.

Bucky

[DODGEBOYS]

howdy /if it were me l would make one by either cutting and rethreading the link or just welding the adjuster on = see modified pic below

[solesurvivor]

howdy /if it were me l would make one by either cutting and rethreading the link or just welding the adjuster on = see modified pic below

That is what I think I am going to do. Thanks

[Matthew Welcher PWA]

I can put my hands on one yes sir, Sorry about the delayed response. Give VPW a call and ask for Matt.