Dodge/Cummins clutch linkage?

[JimmieD]

Anybody happen to have an exploded diagram of the Dodge/Cummins clutch components inside the bellhousing? I got the '00 bell, the release arm and the release bearing but don't know what other parts I'll need. Any info appreciated!

JimmieD

[steved]

Anybody happen to have an exploded diagram of the Dodge/Cummins clutch components inside the bellhousing? I got the '00 bell, the release arm and the release bearing but don't know what other parts I'll need. Any info appreciated!

JimmieD

PM me your email...I'll send you the section out of an 01 FSM...

steved

[JimmieD]

Thanks Steve! Sent you an e-mail....

JimmieD

[steved]

You should have that section...let me know if there is anything else from that 2001 FSM you might need...

steved

[JimmieD]

Hey great Steve! Recieved this a.m. and going to go take a peek at it. Thanks!

JimmieD

Note: Just browsed over it: WOW! I think you just saved me lots of future problems. Has lots and lots of great information and tech. specs. that I didn't have. Good to go now, thanks again!