If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Power Wagon T-Shirts are now available for purchase on-line through the Store.
They are only $15.00 each plus shipping.
Shirts are available in sizes from Small thru 4X and are Sand in color.
Design/Logo is printed on the back of the shirts and the front is free of any designs.
Anybody happen to have an exploded diagram of the Dodge/Cummins clutch components inside the bellhousing? I got the '00 bell, the release arm and the release bearing but don't know what other parts I'll need. Any info appreciated!
Anybody happen to have an exploded diagram of the Dodge/Cummins clutch components inside the bellhousing? I got the '00 bell, the release arm and the release bearing but don't know what other parts I'll need. Any info appreciated!
JimmieD
PM me your email...I'll send you the section out of an 01 FSM...
Hey great Steve! Recieved this a.m. and going to go take a peek at it. Thanks!
JimmieD
Note: Just browsed over it: WOW! I think you just saved me lots of future problems. Has lots and lots of great information and tech. specs. that I didn't have. Good to go now, thanks again!
Comment