Just bought a ’52 M-37 for a winter project. It’s been used, abused and neglected but still moves under its own power (barely). Has spent the last 30 years of service in a semi-marine environment with a huge crane/boom device (a real Rube Goldberg design) welded to the frame and extending over the came. The bed was butchered with an axe of some sort to make holes for the RG boom to be welded to the frame. Then 1500lbs of concrete was added to the bed as a counterweight. That, thankfully wasn’t there when I bought the truck but the damage had already been done. Its job was to lift light aircraft up so as to change from floats to wheels to skis each spring and fall. The engine is very tired, 55psi compression at the low end and 85 at the top. This project will not be a restoration but rather a rebuild to a useful truck that will be maintained properly. I will be asking questions and seeking advice as we plod along this winter.
Regards,
Paul
Wasilla, Alaska
Regards,
Paul
Wasilla, Alaska
Comment