P T O qustion

[Matthew Ziegler]

Quick question, does anyone know if the m37 and the wm300 use the same power take off? Friend of mine found a wm300 for parts with winch. I have a winch, just missing the pto. Thanks for the help, Matt

[Charles Talbert]

Quick question, does anyone know if the m37 and the wm300 use the same power take off? Friend of mine found a wm300 for parts with winch. I have a winch, just missing the pto. Thanks for the help, Matt

Most if not all wm300 have a front and rear pto output shaft, if you don't mind that, (it won't hurt a thing as far as functionality). You can fabricate a pto control lever that works with the M37 set up that is designed to fit around the rear output, and you will be set.

[Matthew Ziegler]

thanks Charles

I've been considering using a spare transfercase lever to activate the pto, looks cooler than the factory piece of flatstock,

[Charles Talbert]

We do in accordance with what the customer wants; but what we like using is 5/8" cold roll round bar to custom fabricate ours. This in conjunction with some modification on the trans cover to close up the huge air hole, we use a rubber bellows type boot to seal it up air tight.