Today I ordered my rear fenders for the truck from Fenders N More for 150.00 each, should be here in a little over a weeks time. I also ordered all the things I needed from Vintage Power Wagon for the cab. I went ahead and ordered a transmission tunnel for the truck instead of trying to make one, so that will be done when it gets here. Other things I ordered from there were door handles for the passenger door, windshield and back window molding, the lacing for the hood area.
In the shop, I worked on the radiator support/trans cooler setup. Picked up some 1/4" neoprene gasket material and used that to make padding on 2 sides of the radiator.
![](http://farm8.staticflickr.com/7415/11988638963_965b488797_b.jpg)
I also notched out for the lower radiator hose with the cutting torch.
![](http://farm8.staticflickr.com/7433/11988633063_bfd4313d85_b.jpg)
Been trying to figure out how I'm going to mount the two trans coolers
In the shop, I worked on the radiator support/trans cooler setup. Picked up some 1/4" neoprene gasket material and used that to make padding on 2 sides of the radiator.
![](http://farm8.staticflickr.com/7415/11988638963_965b488797_b.jpg)
I also notched out for the lower radiator hose with the cutting torch.
![](http://farm8.staticflickr.com/7433/11988633063_bfd4313d85_b.jpg)
Been trying to figure out how I'm going to mount the two trans coolers
![](http://farm8.staticflickr.com/7396/11988713384_528d51c53e_b.jpg)
Comment